These are terms that often come up when we talk about atomizers, and which correspond to the more or less aerial the more or less aerial draw offered by the equipment. How to find your way around ? Which one is the most appropriate ? Which one is more suitable for the beginner ?

Indirect inhalation (or MTL = Mouth To Lungs) 

This is the only method familiar to cigarette smokers, who inhale the smoke to keep it in their mouths before smoke into their mouths before inhaling it into their lungs. Aspiration requires a fairly high vacuum on the filter, so it is impossible to do it any other way otherwise.

For vapers, the method is the same, if the atomizer has a tight draw, you will have to inhale in two stages. This is the recommendation for beginners, who will find the draw of the cigarette without choking on a large cloud of steam, and They will be able to dose their nicotine levels more precisely for effective withdrawal.

Direct Inhalation (or DTL = Direct To Lungs) 

A common method for shisha smokers to inhale smoke directly into the lungs in a single into the lungs in a single inhale. For vapers, it is more for experienced smokers, and will require air-draught equipment, as well as a box sending more power to produce more steam. steam. Because of this larger volume of steam, the nicotine dosage will be lower to avoid nausea to avoid nausea or dizziness.

Whether it is a clearomizer or a rebuildable the draw (or airflow) will be adapted to the type of inhalation. To the type of inhalation. For MTL the atomizer will have a draw varying from tight to very tight, while for DTL the draw will vary from slightly restrictive to air to provide enough air to cool the hotter vapour. In all cases, the draught will be adjustable to suit your preferences.

For the MTL, the driptip channel will be narrower, and in 510 format. For the MTL which allows more air and steam to pass through, the driptip will be wide and 810 in size.

In general, for indirect inhalation, a Coil ≥ 1Ω should be chosen, to vaper. For direct inhalation, a range of Coil from 0.2Ω to 0.8Ω is possible, the box should be able to provide 30 to 30 minutes of vapor. For direct inhalation, a range of Coil from 0.2Ω to 0.8Ω is possible, the box should be able to deliver from 30W to 80W. The lower the Coil, the more power is needed and the denser and hotter the vapour will be.

The PG/VG ratio determines the quality of the flavours and the quantity of vapour. The higher the the higher the PG content, the more flavours will be present and the more pronounced the throat hit pronounced. Conversely, the rate of VG will determine the volume of steam, to the detriment flavours. Generally, for MTL, 70/30 or 50/50 liquids are preferred, while for DTL, 70/30 or 50/50 liquids are preferred. DTL, 30/70, 20/80 or even 0/100 liquids are preferred.

Depending on the draw and therefore the coil of the assembly, it will be necessary to provide more or less power to the atomizer to power to the atomizer for optimal performance. If the pods and boxes simple battery of entry-level are sufficient in the case of the MTL, for the DTL it will often be necessary to turn to more advanced equipment, or even or even dual battery boxes.

The right choice 

As a beginner, don't rush into the latest box with its big, airy clearo, even if the seller assures you that this is what you need. You will You will cough, choke on the unusual volume of vapour, consuming much more liquid than you liquid than you expect.

A small MTL setup will be much more effective for an efficient transition, and will allow you to the best way to discover vaping is from the best angle, while ensuring the best smoking cessation. Later, when your preferences are established, you can always opt for a more advanced equipment, and decide whether you prefer warm or hot vaping, an airy or restrictive draw or restrictive, maximum flavours or big clouds, a clearo or a rebuildable, etc. The pleasure of vaping is also the progressive discovery.